features 20a glass passivated bridge rectifier dim min max a 29.70 30.30 b 19.70 20.30 c 17.00 18.00 d 3.80 4.20 e 7.30 7.70 g 9.80 10.20 h 2.00 2.40 i 0.90 1.10 j 2.30 2.70 k 3.0 x 45 l 4.40 4.80 m 3.40 3.80 n 3.10 3.40 p 2.50 2.90 r 0.60 0.80 s 10.80 11.20 all dimensions in mm _ b c d ee g h k j i l m n p r s a characteristic symbol 05 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average forward rectified output current @ t c = 110c i o 20 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load i fsm 240 a forward voltage per element @ i f = 10a v fm 1.05 v peak reverse current @ t a = 25c at rated dc blocking voltage @ t c = 125c i r 10 500 a i 2 t rating for fusing (t < 8.3 ms) (note 1) i 2 t 240 a 2 s typical total capacitance per element (note 2) c t 60 pf typical thermal resistance junction to case (note 3) r jc 0.8 c/w operating and storage temperature range t j ,t stg -55 to +150 c case: gbj case material: molded plastic. ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: plated leads, solderable per mil-std-202, method 208 lead free plating (tin finish). polarity: molded on body mounting: through hole for #6 screw mounting torque: 5.0 in-lbs maximum marking: type number weight: 6.6 grams (approximate) mechanical data glass passivated die construction high case dielectric strength of 1500v rms low reverse leakage current surge overload rating to 240a peak ideal for printed circuit board applications lead free finish/rohs complian single phase, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified notes: 1. non-repetitive, for t > 1ms and < 8.3 ms. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 3. unit mounted on 300 x 300 x 1.6mm cu plate heat sink. 4. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7. z ibo seno electronic engineering co., ltd. www.senocn.com 1 of 2 10 20 40 60 80 100 d20xb05-D20XB100 d15xb05-d15xb100 d20xb d20xb d20xb d20xb d20xb d20xb d20xb 5s
|